Iphone 3gs không có dịch vụ

bạn đang quan tâm đến Iphone 3gs không tồn tại dịch vụ nên không? nào hãy thuộc PHE BINH VAN HOC theo dõi nội dung bài viết này ngay sau đây nhé!

In this Post you will make a “Untether Jailbreak” khổng lồ use the iPhone 3GS without a SIM card, & will also see how lớn install applications made for iOS7 or iOS8 in older versions.Bạn đã xem: Iphone 3gs 6.1.6 không có dịch vụ

Bạn đã xem: Iphone 3gs không có dịch vụ

Bạn đang xem: Iphone 3gs không có dịch vụ

Introduction

In my passage through the U.S., a friend was going to throw away an iPhone 3GS. I”m no fan of Apple, but I took the old iPhone thinking to use it exclusively for listening to mạng internet radio stations. Actually I had already done this with an old Samsung (Android 2) connected khổng lồ a good speaker & the result was spectacular, even today most radios work seamlessly over the Web. Khổng lồ focus my favorite radios, I usually use an ứng dụng called “Tunein Radio“.

Problem

The other problem was that the application of radio (TuneIn) và other similar applications bởi vì not run on ios version 6.1.6, What is the maximum supported by the iPhone 3GS. The message was something like “This application requires ios 7.0 or later. You must update to quả táo 7.0 in order to download and use this application”. What to lớn do?

Xem thêm: Thủ Tục Cúng Rằm Tháng 7 Âm 2021, Mâm Cỗ Cúng Rằm Tháng 7 Mùa Giãn Cách

Solution

Done some research on Google, trying this and that, I”ve reached a certain “cake recipe”. With that I was able khổng lồ use the iPhone 3GS without a SIM Card, as well as install it applications made for superior versions to tiện ích ios 6.1.6, IE, quả táo 7 và iOS 8. Anyway, I”m not going khổng lồ explain why each thing, But how do. Is a sequence of steps not well prepared, But if you want to try your luck, There goes:

1. Write down your iPhone settings

This is optional và serves only as a precaution, If something does not come out as expected và you have a starting point lớn resolve the impasse.– Look for the information in “Settings > General > About”– Identify the mã sản phẩm of the iPhone: https://support.apple.com/pt-pt/HT201296– IPhone 3GS model number is on the back cover: A1325 & A1303– Example of information to be obtained:

iPhone 3GS version 6.1.6 (10B500) Serial number 81050WZBESG mã sản phẩm mc640HL/A firmware 05.16.08

2. Uninstall / Install iTunes

Raining in the wet, iTunes is the software that you install on your computer to lớn manage the iPhone.– Uninstall any PC your iTunes– Delete the iTunes thư mục inside the thư mục Music (This will erase library.itl)– Install the older version of iTunes compatible with the Redsn0w– tải về here: HTTPS://support.apple.com/kb/DL1784?locale = en_US– Example: https://www.youtube.com/watch?v=3bCnFTTA4n4

3. Vị a Reset

This is also optional and will erase all the data và settings of the iPhone. Serves for the case you want lớn take a “reset” on the iPhone, But if you have something important, don”t forget to vày a backup via iTunes.– Go lớn Settings General Reset > > > Erase All content and Settings > Erase iPhone– Or use iTunes to restore the factory software.

4. Download RedSn0w

Redsn0w is a tool for use in unlocks Apple”s devices, Besides allowing the baseband downgrade.– http://www.iclarified.com/16424/where-to-download-redsn0w-from– File: edsn0w_win_0.9.15b3.zip

5. IPhone firmware download 3

6. Make a “Jailbreak” by RedSn0w

– Run the redsn0w.exe file – Select IPSW > iPhone2 _10A403_Restore ipsw .1 _ 6.0. – Selected the IPSW, continue with Ok > Yes > Back > Jailbreak – check Install Cydia + Install ipad baseband > Yes > Next – Between in DFU mode:

– Turn off the iPhone (Press 3 SEC nguồn button Off) – Segure o botão “Home” + “Power” by 10 seconds, So – Solte só o botão “Power”, mantendo pressionado o botão “Home” to lớn enter boot mode/DFU.- Continue with the basic settings until the home (the area with icons)- vày not close the RedSn0w!

– Example: https://www.youtube.com/watch?v=aobho9U5D08

7. Make a “Just boot” by RedSn0w

– After accessing the iPhone trang chủ (desktop with icons), return to lớn RedSn0w and: – Back > Select IPSW > iPhone2 _10A403_Restore ipsw .1 _ 6.0. – Proceed with Ok > Yes > Just boot – Between DFU mode novamente (See above how to do) – An icon of the phầm mềm called “Cydia” will be created in the Home

8. Click the Cydia icon

– Choose Developed > Done (Don”t move until you finish the Loading Date) – Select the option “Ignore (Temporary)” When – Go to tìm kiếm > p0sixspwn > Install > Confirm (This makes Untether Jailbreak) – Go back to Changes > tăng cấp (n) > Confirm – Please reboot (Press 3 SEC nguồn button Off and tighten it again) – After the reboot, go to tìm kiếm > ultrasn0w > Install > Confirm (software unlock)

Video Tutorial on how to lớn make the procedures (English/partial): How to Update & Unlock iPhone 3GS on iOS kết thúc 6.1.6 – Untether Jailbreakhttps://www.youtube.com/watch?v=suvavhd88Cw

9. Install applications not supported by tiện ích ios 6

I tried several ways to upgrade on ios 6 the iPhone 3GS, but I couldn”t (If you know, Let there!). Since quả táo does not go up, so the Apps came down